
Add to Cart
DDS - 1 Single Phase Two Wire Socket Energy Meter Round Meter Socket type with with IEC Standard
RODUCT INFORMATION
DDS-1 Round energy meter, the most advanced single phase electronic watt hour meter that uses large integrated circuits. It uses digital sampling and SMT technique which is suitable for measuring active energy in electric net with single phase Alternating Current 50Hz or 60Hz. A Liquid Crystal Display (LCD) is used for the register. The meter must be mounted on a location with temperature range of -25C~+55C and relative humidity not exceeding 95%. The air should be free of harmful gases, dust, mildew, insect, etc.
Basic Function
LCD display 5 digit no decimal (default) or 5+1,
Bi-directional total active energy measurement ,reverse active energy measure in the total active energy
Pulse LED indicates working of meter,Pulse output with optical coupling isolation
low starting watts captures energy consumption at leves typically not registered by electrical meter
Two type of cases (protective-class I and II) are available
Optional Function
battery for display when power off
SPECIFICATIONS
Voltage | 240V |
Frequency | 60Hz |
Max. Current | 100A |
Display mode | Counter 5+1 |
Constant | 1600imp/kWh |
Connection mode | Direct Mode |
Meter Size | 174.8*132.5mm |
Installation Size | Comply with ANSI standard |
Standard | ANSI |
APPEARANCE