
Add to Cart
DDS - 1 Single Phase Two Wire Socket Energy Meter LCD Display with googd quality
RODUCT INFORMATION
LCD display 5 digit no decimal (default) or 5+1,
Bi-directional total active energy measurement ,reverse active energy measure in the total active energy
Pulse LED indicates working of meter,Pulse output with optical coupling isolation
low starting watts captures energy consumption at leves typically not registered by electrical meter
Two type of cases (protective-class I and II) are available
SPECIFICATIONS
Rate voltage | 110V,120V,240V |
Working voltage range | 0.8~1.2Un |
Rate Current | 10(60)A,15(60)A,15(100)A 30/200A CL100 CL200 |
Frequency | 60Hz |
Connection mode | Direct type |
Display | register display |
Accuracy class | 1.0 |
Power consumption | <2W/10VA |
Start current | 0.004Ib |
Constant | 555~1600 imp/kWh |
Pulse output | Passive pulse, pulse width is 80+5 ms |
Executive standard | IEC61036,IEC62053-21,IEC62052-11 ,ANSI |
Work temperature | -30ºC~70ºC |
*For special requirements, such as Anti tamper,RS485,IR etc.,it is to be discussed for settlement.
APPEARANCE